Final Stats:

Gain: 7800+ ft
Distance: 19 miles

Exhausting journey on a formidable ridge.

Meetup link here.

GPS track here

KML Google Earth file

Mt. Baldy via the Bighorn Ridge at EveryTrail

From The San Gabriels Vol II by John W. Robinson, 1983, pp 167-168:

Although most parties ascending Old Baldy started from San Antonio Canyon and used either the Bear Flat or Devil’s Backbone route, there were also other ways to climb the mountain. Some hikers took the northeast approach from Glenn Ranch, following the old miners’ road up Lytle Creek to Baldy Notch, then up the Devil’s Backbone to the top. From San Gabriel Canyon, Henry Roberts led parties up the peak via the East Fork and Prairie Fork as early as 1889. In the early years of the present century, a rough trail was built up the long southwest ridge of Baldy from Weber’s Camp in Coldwater Canyon. With the demise of Weber’s Camp in the late 1920s, the trail fell into disuse and disappeared.

The long southwest ridge is the Bighorn Ridge (BHR), and from what we’ve read there hasn’t been any reports of anyone climbing this path other than the fact about 100 years ago there used to be a path. The idea of trying to ascend Mt Baldy this way was brought up in this forum thread. In it some potential routes were considered, but in the end no one had checked it out.

After the build-up, the lack of resolution bothered me. So I looked over the info and added some of my own analysis, and then we decided to go check it out. There was lots of brush just getting up to the ridge, and we realized the energy expenditure to ascend Baldy would be much more than the already imposing stats (> 7000′ in elevation gain) implied.

However we knew it was possible, and so after waiting for the snow to melt, we were ready to go. We originally planned on doing it the previous weekend when it was nice and cool, but the suggestion of rain/snow prevented us. Instead, we had to wait until this weekend which was at the end of a heat wave.

We met at the Baldy Village Visitor’s Center, and car shuttled down to Cow Canyon saddle. We left down the boring truck trail at 5:20 am, taking us down to Cattle Canyon in ~ 5 miles, and to our initial spot for ridge ascent in 7.5 miles. So at about 8am, we started our ascent. The ascent up to Bighorn ridge requires about 1500 ft gain in 0.7 miles, all of which is covered in brush. We did a decent job of pathfinding last time – though it took a while – so this time while we still had to deal with a lot of brush, we were able to remember spots from before which to take and avoid. And bring gardening gloves!

For instance, on the portion of the ascent to BHR that heads northeast, most of the top of the ridge is covered in brush that reallys slows you down. However, if you stay on the west side a little below the ridgetop, the brush is considerably less and fast-going. Still, you must find a good spot to climb back up before the ridge turns back northwest.

We were reasonably fast this time, getting up the 1500′ to the BHR in 1.5 hrs. From here, the next goal is to reach the 6388′ bump (6380 waypoint) which is the junction of a large ridge north of Fossil Canyon to the west. The ‘best choice’ path is still not clear, but it is certainly some combination of staying directly on top of the ridge, but veering off to the west side for some parts. (Key note: For practically the entire BHR, you do NOT want to try to drop down on the eastern side. Way too steep). At waypoint BHR1 (point we got on ridge), there is certainly some resemblance of an old trail on the west side of the ridge. You can follow this for a while, just below the ridge top. However, after a short distance you’ll want to climb back up to the ridgetop, as you’ll run into some rocks / cliffbands.

In this case we probably stayed on the west side too long, and ended up doing some class 3 climbing back up (note if you stay on the ridge the whole time in this section, there will also be some class 3). We stayed on the ridge for a bit, but at times where the brush was simply not negotiable, we would look and drop down the west side again for a little bit, only to reascend to the ridge. Basically, you have to choose the path of least resistance, which may be the one that includes more energy expenditure on steep slopes!

The best example (worst part) might be right before bump 6388′. We were on the ridge with considerable brush ahead of us. Even a short drop to the west side did not look any better. I tried to find a path, crawling by manzanita, but just ran into a whole bunch of brush (buckthorn perhaps…it was dead, light colored branches with pointy ends everywhere, but I didn’t take a picture). I tried climbing over part of it, but then there was just nowhere to go. There was lots of cursing in this part!

Eventually, we went back a bit, descended the west side a bit more than normal, and found some nice exposed area that we could quickly climb to the 6388′ bump. This bump actually provides some nice shaded area, ideal for camping, haha!

Between 6388′ and 7245′, the brush was a little better, but still we had to climb down the side of the ridge multiple times and climb back up to bypass some harsh sections. But from this part up it was a really nice ridge as the mixture of pine trees and rocky portions gave it a real scenic value. From 7245′, I expected from previous scouting with binoculars that the ridge would not be too bad in terms of brush, and that was the case. After a bit of a flat section, we followed the ridge which included some rock scrambling and mainly avoiding manzanita patches up to about the 7600′ countour.

At this point, the group was certainly wearing out, as a lot of energy was used to deal with the brush and rocks and instability of the terrain, and yet we still had 2500′ of gain to go! But it was time to make a final, consistent push. We went up perhaps 1600′ in 0.8 miles up to the final point of the ridge, bump 9425′. This portion was nice, mostly brush free with some rocky portions to negotiate, nice trees and some deer hanging around. But it was steep! Along this ascent one could see unique views of the steep dropoff into Cattle Canyon as well as the San Antonio Ridge.

And with that bump, we made had finished ascending Bighorn Ridge. We continued up to summit Baldy. From there, we took the Bear Canyon trail down.

BHR Rage?

We had 5 people summit, congrats to them! For myself, this was certainly the toughest hike I’ve done in the San Gabriels easily beating Iron Mtn, though I don’t know how it fares to some of the other large off trail climbs, but the combination of brush, rock bouldering, steep terrain, & pure elevation gain make it a very worthy climb!

Final Stats:

Gain: 6500 ft
Distance: 12.4 miles

First Baldy ascent of the year!

GPS track here

KML Google Earth file

Mt. Baldy and Lookout Mt via Bear Canyon at EveryTrail

I couldn’t hike this weekend, but had the opportunity to take a Monday hike. Given that the snow is melting away and some good reports of conditions, I decided to take the Bear Canyon trail to Baldy.

I left about 7:30 am from the Bear Canyon rd parking lot, following the creek and the houses perched up on the sides of the canyon. The first 1.5 miles gains about 1000 ft and brings you to Bear Flats. At this point it was shaded and reasonably cool. I hit the switchbacks and remembered how annoying they are. It seems the switchbacks when facing toward Baldy are steeper than the ones facing toward civilization. On top of that, there were strong gusts of wind blowing toward the south.

Once getting past these switchbacks, it is a really nice hike along the ridge. The sun was out, but I was gaining elevation quickly enough that the temperature was mild. Snow finally crossed the trail at about 8500′, and more consistently above 9000′. Parts were hard while others soft, but this was at like 9 – 9:30 am so it would soften up after that. I followed the footsteps of those who made the trek recently which helped gain level traction, though the snow still slowed me down a little bit. Finally I made the summit at 9:50 am, so it took ~ 2:20 which isn’t bad.

Summit temperature was great, but cool with intermittent winds. I checked out the views for a bit, and ran into two others who came up from the Ski Hut. Then I headed back down.

At about 8400′, I veered off the trail and generally followed the ridge that eventually heads to Lookout Mt. This ridge has a few bumps but nothing terrible (although I was swearing at the steepness of one). This ridge drops quickly down into Cattle Canyon to the west. I brought binoculars and was able to get some great views of Bighorn Ridge. My assessment is the the brush is gone after about 7000′. The portion of the ridge between 6300′ and 7000′ I am not sure about. However, this gives me confidence in the chances of successful ascent.

Following the ridgeline I eventually made it to Lookout Mt. Maybe it was just the day, but what a worthless peak. There is manzanita everywhere, and like someone mentioned, the bees are out in full force.

Couldn’t really get any views west unless I wanted to fight through manzanita. Luckily I found an amazing piece of optical equipment that was obviously used in Michelson’s experiments:

I descended down the east ridge to the saddle at ~ 5500′, I then found a use trail and descended north back down into Bear Canyon. I hit the creek, crossed over and climbed a boulder and found a use trail that led me back to the Bear Canyon trail maybe 0.25 to 0.5 miles from the start.

If I did it again, I would do the loop in reverse, keeping the steep off trail portions for uphill than down.

Final Stats:

Gain: 5400 ft (6300 ft for all excursions)
Distance: 17 miles (18)

Got brush?

Others’ photos and Meetup link here

Well, this one was quite a scouting trip, and exhausting at that. The goal was to try to get up to Bighorn Ridge and we were able to do that, although it definitely required dealing with a good amount of brush.

We set off from Cow Canyon saddle and heading down the fireroad, hitting up the bottom in about 5 miles. We headed up a mile or so up Cattle Canyon until nearing the area deemed as a reasonable starting spot to head up. We met up with HikeUp and discussed potential routes, and figured that there was obvious best way (although there were bad ones). So we began climbing up.

It’s hard for me to illustrate the terrain as I didn’t take a lot of pictures going up. We were simply dealing with a good amount of brush off and on, and I needed to use my hands to clear instead of take pictures. As it turns out, it seemed that in places there was a faint, old use trail of sorts switchbacking up. However, a considerable amount of the path was blocked with brush, usually some combination of yucca, buckthorn, or manzanita.

Open areas were still very steep, but appreciated. The lower half of the ascent seemed to be relatively more covered in brush than the upper, although in both cases we had to resort to crawling around at some points.

It took us probably 3.5 hrs to make it up to Bighorn Ridge, in approximately 2 miles! A solid 1/2 mile per hour clip. Much of this was dealing / breaking route as well as finding best pathways.

At this point, we were planning on heading along the ridge with a goal to get to the bump at ~ 6300 ft. While the rest of the group began to traverse along the eastern edge of the ridge, I checked out the western side and some views of the San Antonio ridge.

There was some faint trails heading both north, south, and west down into Coldwater Canyon. It is too difficult to tell if its from human use or just game trails, but I was intrigued. I continued northernly on this side of the ridge following some faint game trails and eventually climbed back up to the top of the ridge. I had gained distance considerably faster than the rest of the group, who was dealing with more brush and rock bouldering.

We continued on further a bit, but it was already pretty late and we decided to turn around. We didn’t get to the bump I ideally wanted to get to, but we had seen a decent portion of the ridge. The portion ahead still had considerable brush, but I think doable.

At this point we turned around and headed back. The descent took about 1/2 the time of the ascent, given we knew our path better & and had broken trail.

As for estimating the rest of the ridge, I would imagine it would be slow going up to some altitude (maybe 7500 ft?) where the brush would clear up, and from there it would be just elevation gain. I think this would be a big undertaking, but doable as a dayhike. I think exploring this portion now will make the ascent to the ridge much quicker next time as long as I remember the path, which I should.